Quick Answer: What Is The Cheapest Way To Redo A Driveway?

What is the cheapest way to resurface a drive?

Gravel and Stones A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway sub-base is sound..

Can I redo my driveway myself?

If your driveway has bigger holes or cracks in a small area, you may be able to patch it yourself. There are mixtures that fill the damage and then you tamp it down. For larger areas, though, you will want to resurface. … To tell if you need resurfacing, walk outside and examine all the cracks in the driveway.

How much does it cost to get a driveway redone?

Expect to pay about $2.25 per square foot for basic driveway resurfacing. So a typical residential driveway of 750 square feet would cost about $1,687. If you want patterns or colors, you need to pay more, around $4 to $8 per square foot, or $3,000 to $6,000 for a 750-square-foot driveway.

How much does it cost to resurface a blacktop driveway?

Cost to Resurface Asphalt Driveways The cost to resurface an asphalt driveway is a fraction of the price it costs to install a new driveway. Resurfacing costs approximately $2.25 per square foot. Patterns and colors cost more—around $4 to $8 per square foot.

When should I redo my driveway?

Signs of wear but it’s less than 10 years old: Your driveway should last at least 15 years so if it’s less than 10 years old and is cracking or sagging, make repairs to extend its life.

What is the cheapest type of driveway?

Gravel driveways are hands-down the most affordable option upfront. Asphalt driveways place second in cost, followed by cement and pavers. Although gravel driveways are the least expensive initially, they require the most maintenance long-term.

Does a driveway add value to your house?

You may be surprised to learn that a driveway does add value to your home. On estimate a driveway can increase your property’s value by 5-10%. That is quite a bit for an area you do not really need to pay a lot to revamp.

Is 2.5 inches of asphalt enough for a driveway?

For a regular driveway which is going to be used by regular cars, bicycles and bikes; 2 inches of asphalt is thick enough. Generally for resurfacing, 2 inches of asphalt is just about right, but if you are going for a stone surface and need a good base, it is better to layer up the asphalt thicker, around 3 inches.

Is it OK to pave over an existing driveway?

An overlay or resurface can be used on an asphalt driveway, parking lot, or road way. … An existing asphalt surface is the best base for new asphalt. Damaged or troubled areas are repaired before the installation of asphalt.