Quick Answer: How Much Does It Cost To Pave A 2 Car Driveway?

Is paving a driveway a good investment?

Asphalt driveways can last you 20-25 years if properly installed and maintained – a great investment.

While they increase the value of your home, a nice paved driveway can also help sell your home FASTER..

What is the cheapest type of driveway?

Gravel driveways are hands-down the most affordable option upfront. Asphalt driveways place second in cost, followed by cement and pavers. Although gravel driveways are the least expensive initially, they require the most maintenance long-term.

Is 2 inches of asphalt enough for a driveway?

For a regular driveway which is going to be used by regular cars, bicycles and bikes; 2 inches of asphalt is thick enough. Generally for resurfacing, 2 inches of asphalt is just about right, but if you are going for a stone surface and need a good base, it is better to layer up the asphalt thicker, around 3 inches.

What is poor man’s concrete?

Soil-cement is a mixture of Portland cement, natural soil, and water used to form a hard, semi-rigid paving surface. It is most often used in highways or as a sub-base for asphalt or other forms of paving, but it can also be used as a cheap stand-alone paving surface for driveways, sidewalks, patios, or garage floors.

What is the difference between asphalt and blacktop?

Asphalt generally refers to major highways and streets, whereas, blacktop is commonly used to refer to driveways and residential roads. … Blacktop has a higher mixture of stone than asphalt. It also must be heated to a higher temperature, around 300 degrees, than other types.

Is 2.5 inches of asphalt enough for a driveway?

Thus, a compacted asphalt thickness of 2.5 to 3 inches may be more than sufficient for a residential driveway, but a busy mixed-use lot may need a compacted asphalt thickness of 4 inches or more.

What is the best base for asphalt?

Strong blacktop driveways are typically built using crushed angular gravel as a base. This gravel needs to be a minimum of 6 inches thick for light vehicle traffic such as cars and pickup trucks.

What does a new driveway cost?

The cost to put in a new driveway averages $4,426, with a typical range between $2,379 and $6,480. For most types, you can expect to pay $2 to $15 per square foot for materials and installation. Driveway prices depend mostly on the material, which ranges from $1 to $50 per square foot, and the dimensions of the area.

How much does it cost to pave a small driveway?

COST OF A DRIVEWAY In terms of cost, asphalt paving typically runs about $3.00 to $4.00 per square foot depending on the scope of the project (quality & topography of your property, slopes, curves, etc). Concrete is another choice, but typically runs about $6-7.00/SF.

How long does a paved driveway last?

12 to 20 yearsAsphalt driveways typically last 12 to 20 years, depending on the quality of the installation, the climate, the usage they get, and how well they have been maintained. Like most everything else, the better care you take of your asphalt driveway, the longer it will remain in service.

What lasts longer asphalt or concrete?

Concrete driveways normally last longer than asphalt. In general, if installed properly in a suitable climate and maintained regularly, your concrete driveway should last 30 to 40 years, while an asphalt driveway is generally good for 20 to 30 years.

How much does it cost to pave 1 acre?

The PAVE-A-LOT works just as well as the expensive units but sells for a fraction of the cost. Every aspect of the PAVE-A-LOT is easy to learn and the paving can be done at your convenience. This method of paving will save you at least half the cost, which is about $10,000.00 to $12,000.00 per acre.

How much does it cost to pave a driveway with cement?

The most basic method ranges from $10 to $12 per square foot.

How much does it cost to pave a long driveway?

The cost of paving a new driveway is largely dependent on size, materials and labor and can fall anywhere between fifty cents a square foot and fifty dollars a square foot….Average Driveway Paving Cost.Driveway TypeCost Per Square FootGravel$.50-2Asphalt$1-5Concrete$3-10Pavers or Bricks$10-50

How much does it cost to pave a 2000 sq ft driveway?

Paving an asphalt driveway costs $4,723 on average, with a typical range between $2,930 and $6,562. This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot.

How much does it cost to pave a 300 foot driveway?

Other sources estimate the cost to install an asphalt driveway to be between $2,300 and $10,300. Homeowners typically pay per square foot. Reibling adds the average cost per square foot is between $3.50 and $4.50. Some asphalt contractors may charge by the ton, with the cost ranging from $100 to $150 per ton.

Is it cheaper to do asphalt or concrete a driveway?

Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. … In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation. Finishes, details and stains can increase the price tag to as much as $15.00 per square foot.

What is the cheapest way to pave a driveway?

Of the four paving materials described in this guide, aggregate (gravel) is the least expensive, followed by asphalt, concrete, and paving stones. If you’re installing your driveway on a shoestring budget, gravel is your best choice. If you have more wiggle room, you’ll have more choice.

What is the best time to pave a driveway?

Generally speaking, late spring until early fall is the best time to pave a new asphalt driveway. This may vary depending on the region you live in. It’s best to work with asphalt when air and surface temperatures are 50°F and above. Moreover, firm ground is best for paving with asphalt.

Does paving driveway add value?

Paving a new driveway can add significant value to your property. You can definitely get a great return on your investment. At the very least your property value increase will cover the cost of the driveway. The amount of added value can fluctuate.

Can I pave my own driveway?

DIY paving is possible in certain situations, although you can’t go wrong when hiring an experienced paving contractor. A properly installed paved driveway will add value to your home and last for years with minimal maintenance. Consider whether your own efforts will produce a driveway of this quality.