- How do I keep my deck post from rotting?
- Why deck posts should not be set in concrete?
- How long will deck posts last?
- How many support posts do I need for a deck?
- Should deck posts be in the ground?
- How deep should I bury my deck posts?
- Can I set deck posts without concrete?
- Can I bury my deck posts?
- Should I use 4×4 or 6×6 deck posts?
How do I keep my deck post from rotting?
Placing a thick layer of loose gravel at the bottom of the post hole will allow groundwater to trickle through the rocks and down away from the base of the post.
This will prevent the post from rotting by keeping it constantly dry.
You can purchase gravel at a local hardware store or landscaping-supply business..
Why deck posts should not be set in concrete?
A deck post should always be placed on top of footing, not inside concrete because it can break. … Concrete tends to absorb moisture and wood expands when it gets wet, so these two factors combined will result in the wood breaking the concrete.
How long will deck posts last?
The Forest Products Laboratory and other research groups have shown that treated wood stakes placed in the ground for more than 40 years remain rot-free. But young pressure-treated decks, many less than 10 years old, are being shoveled into landfills.
How many support posts do I need for a deck?
As a general rule, if the support posts are spaced no more than 10 feet on center, all you will need to use are 4- by 4-inch posts. Most local building codes permit 4-by-4 posts 10 feet on center for all but multistory decks..
Should deck posts be in the ground?
Pressure-treated posts should always be ground contact use for deck lumber. Deck post installation is one of many steps to building a deck. Having the most up-to-date instructions and proper treated lumber are important to ensure correct installation.
How deep should I bury my deck posts?
Footings typically must extend below the frost line to prevent shifting during freeze-thaw cycles. Dig footing holes about 6 inches deeper than required. Fill the bottom of the hole with 6 inches of gravel and compact the gravel with a 2×4 or wood post.
Can I set deck posts without concrete?
Plastic piers require the digging, but unlike footings, there is no concrete involved. The pier is put into the hole and attached the post, giving you your deck without wasting hours installing footings.
Can I bury my deck posts?
This footing method involves pouring a concrete pad at least 12” thick at the base of your hole. The pressure treatment companies insist that these posts will last longer in the ground than the deck frame that is built above it, and this practice is accepted by the IRC code. …
Should I use 4×4 or 6×6 deck posts?
4×4 post will be fine. I have built many decks for new homes with them. 6×6 is more sturdy of course and will not twist as easy, but for structure purposes, 4×4 will be fine. I would just not go more then 10′ apart with them.