Question: How Many Bags Of Concrete Do I Need For A 6×6 Post?

How many posts will 1 bag of Postcrete do?

You’ll need to bury the posts at least 2ft In the ground.

As for how many bags of postcrete you need per post, that’s purely dependant on how big you make the post holes.

As a rule of thumb, when using standard post hole diggers, I average 1 bag per post.

For larger holes I would allow 1.5 bags to 2 bags per hole..

How many bags of cement do I need for one fence post?

3 feet deep and ½ a bag of redi-mix per post.

How deep should a 6 foot fence post be in the ground?

The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole. Then compact and level the gravel using a post or 2×4.

How do I keep my post level while concrete dries?

Fill the hole up to a depth of 8 inches from ground level with 1/2-inch drainage gravel. Use rough-cut gravel with sharp edges. It will hold the post better than smooth rock.

Can you mix Postcrete in a bucket?

Can you mix Postcrete in a bucket? Dig hole, pour in bucket of water, pour in bag of postcrete. No mixing.

How much concrete do I need for a 6×6 post?

The general rule of thumb when setting a post is that the depth of the post’s hole needs to be 1/3 to 1/2 of the actual above-ground height of the post. So, six-foot-high fence posts ideally need to be buried three feet into the ground. The diameter of your post hole should be three times the diameter of your post.

How long will a treated 6×6 post last in the ground?

40 yearsThe treated post that are rated for ground contact are guaranteed for 40 years.

How long will a pressure treated 6×6 last in the ground?

The Forest Products Laboratory and other research groups have shown that treated wood stakes placed in the ground for more than 40 years remain rot-free. But young pressure-treated decks, many less than 10 years old, are being shoveled into landfills.

Is 2 feet deep enough for fence posts?

The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.

Is Postcrete better than concrete?

Concrete spurs are ideal for repairing the posts, use postcrete, sets pretty quick and you should only need 1 bag per hole. Concrete blocks will be the easiest for sitting the shed bearers on, or split them in half.

Can I use Postcrete in the rain?

While the rain will provide plenty of ground moisture, doing this project in the rain may introduce too much groundwater to the mix, weakening the finished product. … The rain can also cause problems with the curing process of the concrete.