How Much Concrete Do I Need For Fence Posts?

Do you need to concrete every fence post?

Concrete is the most secure material for setting fence posts, especially if you have sandy soil.

Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place..

How long does it take for concrete to dry for fence posts?

The concrete sets up in 20 to 40 minutes, so you can quickly move on to the next stage of the project (a great convenience when setting fence posts) or backfill the hole to finish the job. Under normal curing conditions, you can apply heavy weight to the post (a basketball backboard, for example) after just 4 hours.

Can pressure treated posts be set in concrete?

Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. … Concrete should be poured around the post – no concrete under the post.

How many posts will a bag of Postcrete do?

You’ll need to bury the posts at least 2ft In the ground. As for how many bags of postcrete you need per post, that’s purely dependant on how big you make the post holes. As a rule of thumb, when using standard post hole diggers, I average 1 bag per post. For larger holes I would allow 1.5 bags to 2 bags per hole.

between six and eight feetTypically, fence posts are spaced between six and eight feet apart. The corner posts are set first. To align all of the posts in between, stretch a line from each corner post to work as your guide.

What is the smoothest concrete?

I suggest using an aggregate free Portland cement and sand (or silica powder if its available). The ratio is typically 1 part cement to 3 parts sand and water of course. The trick to getting a smooth final surface starts after its poured and before it sets.

Can I pour concrete in a hole full of water?

The good news is that you can pour the concrete in water. … The biggest issue with pouring concrete under water is movement. If the water is moving, it can wash away the cement paste that’s holding the sand and gravel together. But if the water is calm, then it’s not a problem at all.

How much quikrete do I need for a fence post?

Remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6 feet above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground). The calculator will indicate the number of 50 lb. bags of QUIKRETE® Fast-Setting Concrete you need.

How many bags of concrete do I need for a 6×6 post?

As I recall, a 60# bag of concrete is about . 5cf, so you’d need 3 bags per hole.

Is quikrete as strong as regular concrete?

Quikrete Fast-Setting Concrete Mix is easy to use — just add water — and it sets in 20 to 40 minutes. It’s the most efficient option for setting posts for things like mailboxes, fences and lamps. … That’s stronger than the concrete used for foundations on most homes.

Should metal fence posts be set in concrete?

use string and stakes to layout the desired location for your fence and dig holes for metal posts. Concrete can be used to set the posts into the ground. Use cedar, redwood or preservative-treated lumber and finish with exterior grade stain or paint.

How do you keep fence posts from rotting in concrete?

Consider Adding Posts to Concrete From here, you should fill the hole with about 6 inches of gravel. This will prevent rotting by ensuring that the post is kept dry when water makes its way into the soil. Place the post in the gravel, then fill with a batch of cement until it reaches the top of the hole.

Should I use 4×4 or 6×6 fence posts?

6×6 is overkill for sturdiness. 4×4 is the standard. And if you do it as a privacy fence, 6×6 posts stand out and make it look more substantial.

What is 6000 psi concrete used for?

For new concrete construction projects, concrete overlays and concrete repairs. Use to construct footings, sidewalks, slabs, steps and patios, setting deck posts, fence posts or poles.

What is the difference between cement and concrete?

What is the difference between cement and concrete? Although the terms cement and concrete often are used interchangeably, cement is actually an ingredient of concrete. Concrete is a mixture of aggregates and paste. … Cement comprises from 10 to 15 percent of the concrete mix, by volume.

Is 2 feet deep enough for fence posts?

The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.

What is the best concrete mix for fence posts?

In terms of the ratio to use for a concreting fence posts, the best mix is a mix of 1:2:4 (1 cement, 2 sand, 4 aggregate). Concrete is always best mixed using a cement mixer to ensure it’s even, but if you only need to mix a little, hand mixing is ok (see mixing concrete project above for tips on how to do this).

How long do concrete posts need to set?

Typically, you can apply some weight to the posts after 4 hours, but it’s a good idea to wait at least 24 hours before resuming fence construction. Standard concrete mixes may take up to two hours to set and should cure for 24 to 48 hours before any forces are applied to the posts.

Do I need gravel under concrete?

Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting. Gravel is especially important in clay soil because it doesn’t drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains.

How deep should posts be for a 6 foot fence?

2 feetThe depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole.

How do I keep my post level while concrete dries?

Fill the hole up to a depth of 8 inches from ground level with 1/2-inch drainage gravel. Use rough-cut gravel with sharp edges. It will hold the post better than smooth rock.