Can You Put Asphalt Over Existing Asphalt?

Should new asphalt be sealed?

For starters, never seal a new asphalt driveway.

Asphalt needs a minimum of six months for the oils in it to evaporate.

Ideally you want your sealer to be on your driveway for at least 48 hours before any rain comes down on it..

How can I pave a cheap driveway?

Gravel driveways are hands-down the most affordable option upfront. Asphalt driveways place second in cost, followed by cement and pavers. Although gravel driveways are the least expensive initially, they require the most maintenance long-term.

Should I resurface or replace my asphalt driveway?

If your driveway has more than a few minor cracks, it may be time to consider resurfacing. If the materials below the surface of your driveway are still in good shape, the asphalt can be resurfaced. Our asphalt paving contractors can reuse existing materials to completely resurface your driveway.

What is the difference between asphalt and blacktop?

Asphalt generally refers to major highways and streets, whereas, blacktop is commonly used to refer to driveways and residential roads. … Blacktop has a higher mixture of stone than asphalt. It also must be heated to a higher temperature, around 300 degrees, than other types.

How much does it cost to blacktop a parking lot?

On average, it costs between $1.49 and $1.69 per square foot to re-pave an asphalt parking lot. Striping, marking, and curbing will come at an additional cost.

Is blacktop cheaper than asphalt?

Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.

Is 2 inches of asphalt enough for a driveway?

For a regular driveway which is going to be used by regular cars, bicycles and bikes; 2 inches of asphalt is thick enough. Generally for resurfacing, 2 inches of asphalt is just about right, but if you are going for a stone surface and need a good base, it is better to layer up the asphalt thicker, around 3 inches.

Can you pave over an old asphalt driveway?

An overlay or resurface can be used on an asphalt driveway, parking lot, or road way. … An existing asphalt surface is the best base for new asphalt. Damaged or troubled areas are repaired before the installation of asphalt.

Can I pave my own driveway?

DIY paving is possible in certain situations, although you can’t go wrong when hiring an experienced paving contractor. A properly installed paved driveway will add value to your home and last for years with minimal maintenance. Consider whether your own efforts will produce a driveway of this quality.

How much does it cost to repave asphalt driveway?

Resurfacing an asphalt driveway costs $1,800 to $4,200, or $3,000 on average. This price breaks down to $3 to $7 per square foot for the typical 600 square-foot area. Resurfacing your driveway with asphalt involves performing minor repairs and applying a new layer on the top.

What is an asphalt overlay?

An asphalt overlay is, essentially, a patch job done on a stretch of asphalt. This is the usual method when asphalt is showing some cracking or potholing, while still not being damaged enough to need replacement.

How long will an asphalt overlay last?

If an overlay is desired, there has to be an expectation of the customer that this method is not as long-lasting as a full removal and replacement. A 15-20 year life on a removal and replacement is common, whereas an overlay may last a shorter time, about 10-15 years.

How much does it cost to overlay asphalt?

Asphalt overlay costs $3 to $7 per square foot for standard materials. This project, often called a “top coat,” runs less because it involves a thinner layer on top of an existing surface.

What is poor man’s concrete?

We have a few companies locally that offer “poor man’s concrete”. I’m not sure exactly what it is, but I’ve seen it in driveways and such. It’s a white powdery material they dump and flatten out and when it gets wet, it’s supposed to harden like cement. But, it’s not as pretty and won’t get as hard.

How much does a ton of asphalt cost?

Asphalt costs $40 to $80 per ton. The cost of asphalt is $0.75 to $2.00 per square foot for hot-mix.

How much does it cost to pave a small driveway?

Average Driveway Paving CostDriveway TypeCost Per Square FootGravel$.50-2Asphalt$1-5Concrete$3-10Pavers or Bricks$10-50

How much does it cost to pave a 100 foot driveway?

Other sources estimate the cost to install an asphalt driveway to be between $2,300 and $10,300. Homeowners typically pay per square foot. Reibling adds the average cost per square foot is between $3.50 and $4.50. Some asphalt contractors may charge by the ton, with the cost ranging from $100 to $150 per ton.

How much does a ton of asphalt cover?

The density of asphalt is generally given at 140 lbs per cubic foot (I have assumed you would like this in imperial as you use feet) At that density a ton ( 2240 lbs) is 16 cubic feet so it now comes down to how thick you want the coating, at 1 inch thick the ton will cover 12 x 16 (192) square feet.